Archives

now browsing by author

 

On the ground..!

That’s it, VivaLaVida found the floor for the first time with her new figure! It is still not “rolling” as long as it still miss a lot of things, including the transfer case and the two fuel tanks. But after many weeks waiting on parts not supplied, it’s nice to see it on its wheels!

130508_1b

130508_2b

It seems more high than in reality because the fender flares will only be raised after painting …

Second filler…

Fill the second diesel tank which will soon be installed involved laying a second fill door. It is now installed.

130507b

Waiting on the wheels…

… Chris continues by installing an exhaust temperature gauge to monitor engine conditions and the rear tow hitch.

 130506b

130501_1b

4×4 conversion has begun

Most of the parts are now by Chris who began the dismantling of the suspension. Here are the first pictures of the conversion.

130411_1b

130411_2b

VivaLaVida grew!

Two feet more in a week! not bad, isn’t it?   🙂

The high top is now installed and sealed, revealing the real silhouette of VivalaVida.

130503_3b

130503_2b

130503_1bOnce the wheels arrived – in principle at the beginning of next week – and the second filler for auxiliary fuel tank installed, VivalaVida will be towed to the paint shop to adopt a slightly more discrete color in nature…

Soon on its wheels?

That’s it, the rear Sterling axle has found its place… Not quite yet as elements maintaining angular positioning are still missing. But no positioning before the arrival of the transfer case…

130430b

As the wheels set came with a wrong pitch, it was returned. As nothing is ever simple, those corresponding to the VivalaVidaaxle are not available in black. Chris has ordered a polished set and will have to apply black coating that I had chosen.

Headwear in preparation…

Since sme suppliers really bother with the delivery tim,e we have to find solutions to move forward. Thus, Robert moved to Chris’s shop to start laying the high top.

1st step: cutting the car roof.

130503_4b

130429_1b

 

2nd step : presenting the gross high top.

130429_2b

 

 

Socks from VivaLaVida!

Not bad, isn’t it?

…Except that tires fitted, Chris realized that the supplier has sent wheels with wrong holes..! So back to square one.  :-/

130424_b

It is turn of the rear…

While I got my truck license today, work continues in North Carolina, preparing the rear of the frame, installimg the protection of the auxiliary tank and underfloor storage compartment. Installation of the tow hitch will follow.

130423_1b

 

And here rear skid in place!

130423_2b

 

One axle of two!

Since some parts arrived, installing front axle continues!

Front “Full Floating” axle has been built by Chris with locker and bigger brake rotors. It’s now in place.130419_3b130419_2b130423_3b